The brief process of artificial turf construction is as follows:

1. Position measuring line.

2. Spread artificial grass.

3. Install splicing tape.

4. Brush glue

5. Cutting line

6. Install splicing white line.

7. Fill quartz sand and black colloidal particles.

8. Completion acceptance

What you should pay attention to when you shop:

1. Basic acceptance shall ensure the flatness and compactness of the site and whether it meets the drainage requirements.

2. Mark the line when measuring, so as to distinguish the laying direction and location.

3. When spreading the grass, pay attention to the overlapping position of the joint at the junction of 10cm, and the steel nail fixation is not convex.Avoid loose joints and artificial damage.

4. Check whether the artificial turf adhesion is firm after the installation.

5. After the filling of quartz sand black rubber, check whether it is smooth and sufficient.