1. Preliminary preparations for roof greening artificial lawn construction
Preparatory work for construction tools: linear cutter, circular cutter, joint compactor, human grass compactor, etc.
Grass transport and laying: The artificial lawn is transported into the construction site, and the curled artificial lawn is spread out and laid flat in the designated site according to the site division.
Site environment test: to ensure that the construction site temperature is maintained at more than 10 C.
Pavement direction: the direction of artificial lawn is the same, ensuring that the artificial grass is turned in the same direction.
Other preparations: confirm the number and color of artificial turf.
2. Construction measurement of artificial lawn for roof greening
Using the precision measuring tools, such as the theodolite measuring tool, the standard ruler and other tools, according to the site design drawings, the lines and lines are marked on the site, and the paint brushes with different colors are clearly marked, so that the areas of each area are clearly divided.
3. Construction steps of artificial lawn with roof greening
(1) after the roof lawn is pruned, glue is applied. To ensure that the lawn is dry before gumming, the degree of drying in the artificial lawn is in conformity with the gumming, the coating speed should be uniform, the glue can not be repeated, the order of the coating must be consistent, and the high and low phenomena can be avoided.
(2) the adhesion of artificial turf. The adhesive tape is attached to the bottom cloth along the marked line; then the artificial lawn line is attached to the adhesive tape along the line marking line to ensure its smoothness and firmness.
(3) cutting and splicing of artificial turf. Using special tools, such as line cutter or circular cutter, cut and cut the artificial turf. The cutting size should be consistent and the tailored artificial turf is spliced and the distance between the stitching seams should be less than 2mm.
(4) artificial turfgrass splicing. Artificial turf was spliced out to be bonded, and the lawn was spliced with adhesive tape.
(5) compacted artificial turf. The lawn grass compactor is used to compacted the lawn joints to ensure that the joints are smooth and firm.
(6) artificial lawn paving. Artificial lawn paving to ensure that the direction of lawn paving should be consistent, and the direction of grass silk should be the same. After the artificial lawn paving is completed, the field inspection will be carried out to ensure that the paved lawn is smooth, and there is no off line and weeds.
News Center
中文版
English
ภาษาไทย
About Us
Your current location：