Seven, the site is black and messy.
1, too many colloidal particles or unqualified quality, resulting in large area of black pollution.
2. The local area of artificial grass falls off, leaving only filler.
3, the lack of professional construction experience, the lack of dedicated tools and qualified skilled technicians;
4, there is a lack of necessary maintenance after completion of construction.
Eight. Surface layer bonding?
1. The foundation is not smooth and easy to accumulate water.
2, the quartz sand and other accessories used are too thin or uneven.
3, there are too many impurities in rubber particles or quartz sand and so on.
4. Artificial grass is poor in quality, inelastic and easy to shed, and lacks necessary maintenance.
Nine, the surface layer is uneven, and the artificial grass is sparse and uneven.
1. The foundation of artificial grassland is not smooth.
2, the auxiliary materials are uneven in filling and punching, and some grass seedlings are covered by fillers during construction.
3, artificial grass production process is not professional, there is a larger grass height error;
4, the lack of professional construction experience, the lack of dedicated construction tools and qualified skilled technicians.
Ten. Site water?
1, the foundation is uneven, and the low place is easy to accumulate water.
2, lack of maintenance caused the site hardening, drainage is not smooth;
3, local grass fiber wear is serious, opened into potholes.
4, filling material is unreasonable.
News Center
中文版
English
ภาษาไทย
About Us
Your current location：