Everything has quality problems, and artificial turf is no exception. The quality problem with the most complaints from customers should be that the glue is not sticky and there is a curl between the lawns. This is also a headache for our artificial turf companies and the construction side. It is an urgent problem we need to find a solution. So how is this situation of curling? How to solve it?
There are only three reasons for this: 1. Construction technology is not good; 2. Glue quality problems; 3. Insufficient filling. The construction technology does not mean that the constructor has some wrong practices and some non-standard work conditions during the construction process. For example, the cracks between the shearing lawns are too large, the connecting belts are unevenly laid, and the lawn is curved and curved. This technique is simple and straightforward.
The second reason is the quality of the glue; the problem of the quality of the glue and the improper use of the glue are one of the most important reasons for the edge of the artificial turf. 80% of the problem of the edge is caused by the glue problem. First, the time of glue application is not properly controlled. Take the artificial turf professional glue Mabe glue as an example. If the weather is good, it is generally after 5 minutes after the glue is applied, the glue reaches the sticky and the flux is volatilized by 1/3. When it is strong, it is difficult to pull it after sticking, and you can see the glue drawing phenomenon and then put the lawn down and use the roller or artificial step on the interface repeatedly three times. If the weather is cloudy, it is best to stick it 10 minutes after the glue is applied. Second, the amount used in the rubber coating process is too small, resulting in a weak edge, so it is one of the reasons that affect the edge of the glue.
The third reason is that the filler is insufficient; the shortage of the filler is generally a problem of the curling edge which occurs after the use of the site. The sand filling and the insufficient amount of the particles cannot press the artificial grass joint, and the interface is cracked after the pedaling. In the case of curling, the artificial turf of 50mm height must be above 25KG quartz sand and 5KG rubber granules. The sufficient filling can greatly inhibit the occurrence of the lap joint and prolong the service life of the site.
In the process of construction, it is necessary to carry out rework and redo immediately. Otherwise, the break in the field will be rapidly expanded. Over time, there will be more cracks and warping. If it is done, it will appear. It is best to fix it in time, which will pose a safety hazard to athletes. Therefore, we must pay more attention to the construction, take it seriously, and achieve a success.
News Center
中文版
English
ภาษาไทย
About Us
Your current location：