Artificial lawn is favored by consumers because of its bright appearance, good performance, long service life and low maintenance cost. It can be achieved in almost all kinds of places. However, besides the quality of artificial lawn itself, the mastery of laying skills is also crucial, including the choice of glue.
In order to save costs, some people will use some cheaper ordinary glue to pave artificial lawn, but precisely because of this, the construction quality and later maintenance of artificial lawn buried hidden dangers. The correct way is to use special glue for artificial lawn. Because it is a specific formula water, the price will be higher, but it can play a good role in fixing the bond in the process of laying artificial lawn.
Because this glue is made of special ingredients, it has strong adhesion to plastic products and strict waterproofing, so the lawn bonded by this glue not only has a long life, compression and wear resistance, but also has no seam marks on the appearance, so it is necessary to supplement the construction of artificial lawn. Help products.
How to use?
1. First of all, adhesives suitable for adhesives must be selected according to the nature, composition and application of the adhesives.
2. The surface of the adhesives should be smooth and dry. There should be no concave and convex phenomena, no oil stains, dust and impurities. Otherwise, the effect is not good.
3. Apply a brush or scraper on both sides of the sticky material after cleaning, smoothing and drying from inside to outside, and then air it naturally for 8-16 minutes or longer, whichever adhesive layer is slightly non-sticky. (When the weather is clear and the temperature is high, the natural air drying time is about 8 minutes; on cloudy and rainy days, the natural air drying time is about 8 minutes. When the temperature is low and the air is humid, the natural drying time is 16 minutes or longer to achieve the volatilization of the solvent in the glue. The glue must be evenly coated.
4. Align the bonded surface at one time, press it by the internal and external agent (excluding air), press it with rubber hammer or press equipment, and peel strength test can be done after 48 or 72 hours.
5. If the artificial lawn glue is too thick to be constructed, it can be diluted with a special diluent in the morning. It must be fully stirred and evenly used.
News Center
中文版
English
ภาษาไทย
About Us
Your current location：